POWERDEE product guide

4-in-1 protection kit installation guide

Choose the component you want to install and follow the short steps below.

View product details
Powerdee ชุดคอมโบกันรอย iPhone 16/17 Pro Max 4 ชิ้น

01

Phone-edge protective film

  1. Remove the case, then clean and fully dry the phone edges.
  2. Check alignment around every button and port.
  3. Peel the backing gradually while pressing the film from one end to the other. Do not stretch it.
  4. Do not use sharp tools. If it traps dust or becomes misaligned, stop and send support a clear photo.
Phone-edge protective film

Video coming soon

02

Camera-lens-base protective film

  1. Remove the case, then clean and fully dry the camera area.
  2. Align every lens and sensor opening.
  3. Lower the film straight down and press gently around the base.
  4. If an opening is blocked or the film does not sit flat, do not force it; send support a clear photo.
Camera-lens-base protective film

Video coming soon

03

Speaker dust mesh

  1. Clean and fully dry the speaker opening.
  2. Align the mesh so it covers only the speaker opening without overlapping nearby microphones or ports.
  3. Press it gently and evenly.
  4. Test the sound. If it becomes muffled or the mesh moves, stop using it and contact support.
Speaker dust mesh

Video coming soon

04

Camera Control button protector

  1. Clean and dry the Camera Control button area.
  2. Align the protector directly over the button.
  3. Press it evenly without excessive force.
  4. Test the button. If normal operation is affected, remove the protector and contact support.
Camera Control button protector

Video coming soon